A biocatalyst for the removal of sulfite from alcoholic beverages

The presence of sulfites in alcoholic beverages, particularly in wines, can cause allergic responses with symptoms ranging from mild gastrointestinal problems to life threatening anaphylactic shock in a substantial portion of the population. We have developed a simple and inexpensive biocatalytic method that employs wheatgrass (Triticum aestivum) chloroplasts for the efficient oxidation of sulfites in wines to innocuous sulfates. A sufficiently high rate of sulfite oxidation was obtained in the presence of ethanol at concentrations commonly found in most wines. Crude chloroplast preparations at a concentration as low as 5 mg/mL were capable of reducing sulfite in commercial white wines from 150 ppm to under 7.5 ppm within 3 hours. A 93% removal of sulfite in commercial red wines was observed with 1 mg/mL chloroplasts within 45 min. Optimal sulfite removal efficiency was observed at pH 8.5 and was promoted by illumination, indicating the participation of light-induced photosynthetic electron transport processes in sulfite oxidation. Overall, this work indicates that biocatalytic oxidation using wheatgrass chloroplasts can be employed to remove sulfites from beverages prior to consumption.     

Performance of a thermophilic sulfate and sulfite reducing high rate anaerobic reactor fed with methanol

Thermophilic sulfate and sulfite reduction was studied in lab-scale Expanded Granular Sludge Bed (EGSB) reactors operated at 65°C and pH 7.5 with methanol as the sole carbon and energy source for the sulfate- and sulfite-reducing bacteria. At a hydraulic retention time (HRT) of 10 h, maximum sulfite and sulfate elimination rates of 5.5 gSO₃ ^2- L^-1 day^-1 (100 % elimination) and 5.7 gSO₄ ^{2- -1} day^-1 (55% elimination) were achieved, resulting in an effluent sulfide concentration of approximately 1800 mgS L^-1. Sulfate elimination was limited by the sulfide concentration, as stripping of H₂S from the reactor with nitrogen gas was found to increase the sulfate elimination rate to 9.9 gSO₄ ^2- L^-1 day^-1 (100 % elimination). At a HRT of 3 h, maximum achievable sulfite and sulfate elimination rates were even 18 gSO₃ ^2- L^-1 day^-1 (100% elimination) and 11 gSO₄ ^2- L^-1 day^-1(50% elimination). At a HRT of 3 h, the elimination rate was limited by the biomass retention of the system. 5.5 ± 1.8% of the consumed methanol was converted to acetate, which was not further degraded by sulfate reducing bacteria present in the sludge. The acetotrophic activity of the sludge could not be stimulated by cultivating the sludge for 30 days under methanol-limiting conditions. Omitting cobalt as trace element from the influent resulted in a lower acetate production rate, but it also led to a lower sulfate reduction rate. Sulfate degradation in the reactor could be described by zeroth order kinetics down to a threshold concentration of 0.05 g L^-1, while methanol degradation followed Michaelis-Menten kinetics with a K_m of 0.037 gCOD L^-1.     

Comparative assessment of acid, alkali and salt tolerance in Listeria monocytogenes virulent and avirulent strains

Listeria monocytogenes is an opportunistic bacterial pathogen of man and animals that has the capacity to survive under extreme environmental conditions. While our knowledge on L. monocytogenes and its ability to sustain within wide pH and temperature ranges and salt concentrations has been largely built on the virulent strains of this species, relatively little is known about avirulent strains in this regard. In this study, we extend our analysis on avirulent L. monocytogenes strains. By subjecting three virulent (EGD, 874 and ATCC 19196) and three avirulent (ATCC 19114, HCC23 and HCC25) strains to various pH and salt concentrations, it was found that L. monocytogenes recovered well after treatment with 100 mM Tris at pH 12.0, and to a lesser extent at pH 3.0. Interestingly, avirulent L. monocytogenes strains showed a somewhat higher tolerance to alkali than virulent strains. This unique feature of avirulent L. monocytogenes strains may potentially be exploited for the development of a rapid technique for differentiation between avirulent and virulent strains. Furthermore, all L. monocytogenes strains tested were resistant to saturated NaCl (about 7 M, or 40% w/v) for a long period of time (20 h and possibly longer). Together, these results highlight that acid, alkali, and/or salt treatments commonly used in food product processing may not be sufficient to eliminate L. monocytogenes, and therefore stringent quality control measures at the beginning and end of the food manufacturing process is essential to ensure that such food products are free of listerial contamination.     

Changes in sulfate-reducing bacterial populations during the onset of black band disease

Factors that facilitate the onset of black band disease (BBD) of corals remain elusive, though anoxic conditions under the complex microbial mat and production of sulfide are implicated in necrosis of underlying coral tissues. This study investigated the diversity and quantitative shifts of sulfate-reducing bacterial (SRB) populations during the onset of BBD using real-time PCR (RT-PCR) and cloning approaches targeting the dissimilatory (bi)sulfite reductase (dsrA) gene. A quantitativePCR (qPCR) assay targeting the 16S rRNA gene also provided an estimate of total bacteria, and allowed the relative percentage of SRB within the lesions to be determined. Three Montipora sp. coral colonies identified with lesions previously termed cyanobacterial patches (CPs) (comprising microbial communities unlike those of BBD lesions), were tagged and followed through time as CP developed into BBD. The dsrA-targeted qPCR detected few copies of the gene in the CP samples (<65 per ng DNA), though copy numbers increased in BBD lesions (>2500 per ng DNA). SRB in CP samples were less than 1% of the bacterial population, though represented up to 7.5% of the BBD population. Clone libraries also demonstrated a shift in the dominant dsrA sequences as lesions shifted from CP into BBD. Results from this study confirm that SRB increase during the onset of BBD, likely increasing sulfide concentrations at the base of the microbial mat and facilitating the pathogenesis of BBD.     

Association of alkali metals and Alkaline-earth metals with the risk of schizophrenia in a Chinese population: A Case-Control study

Alkali metals (AMs) and alkali earth metals (AEMs) affect levels and signaling of neurotransmitters, which potentially play a role in the etiology of schizophrenia (SCZ). The current case-control study aims to explore how AMs [i.e. Potassium (K), sodium (Na), rubidium (Rb), cesium (Cs)] and AEMs [i.e. magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba)] in serum could associate with SCZ. One hundred and five inpatients with SCZ and 106 age- and sex-matched healthy controls (HCs) were recruited from Weifang, China. Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) was used to evaluate serum concentrations of Na, K, Ca, Mg and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) was for Rb, Cs, Sr, Ba. Subjects with SCZ had significantly higher Mg and Sr serum concentrations than HCs (20.86 vs. 19.73 μg/mL of Mg, p < 0.001; 53.14 vs. 42.26 ng/mL of Sr, p < 0.001). After adjusting for confounders, the odds ratio of Mg and Sr remain significantly higher in the SCZ group (Mg: OR = 2.538, 95 % CI: 1.254–5.136, p=0.010; Sr: OR = 3.798, 95 % CI: 1.769–8.153, p = 0.001). No significant differences between SCZ subjects and HCs were observed for other AMs and AEMs. Higher serum concentrations of Mg and Sr were associated with SCZ. Studies are suggested to find the related mechanisms and provide clues for pathogenesis of SCZ, which would impact prevention and treatments of SCZ.     

Direct catalytic electrochemistry of sulfite dehydrogenase: Mechanistic insights and contrasts with related Mo enzymes

Under hydrodynamic electrochemical conditions with slow cyclic voltammetry sweep rates we have been able to probe catalytic events at the molybdenum active site of sulfite dehydrogenase (SDH) from Starkeya novella adsorbed on an edge plane graphite electrode within a polylysine film. The electrochemically driven catalytic behaviour of SDH mirrors that seen in solution assays suggesting that the adsorbed enzyme retains its native activity. However, at high sulfite concentrations, the voltammetric waveform transforms from the expected sigmoidal profile to a peak-shaped response, similar to that reported for the molybdenum enzymes DMSO reductase and nitrate reductase (NarGHI and NapAB) where a redox reaction at the active site has been associated with a switch to lower activity at high overpotentials. This is the first time a similar phenomenon has been observed in a Mo-containing oxidase/dehydrogenase, which raises a number of interesting mechanistic problems. The potential at which the activity of SDH becomes attenuated only emerges at saturating substrate conditions and occurs at a potential (ca. + 320mV vs NHE) well removed from any known redox couple in the enzyme. These results cannot be explained by the same mechanism adopted for DMSO reductase and nitrate reductase catalysis.     

Effect of sulfite exposure on zinc, iron, and copper levels in rat liver and kidney tissues

Sulfite is a potentially toxic molecule that might enter the body via ingestion, inhalation, or injection. For cellular detoxification, mammalians rely on sulfite oxidase to convert sulfite to sulfate. The purpose of this research was to determine the effect of sulfite on zinc, iron, and copper levels in rat liver and kidney tissues. Forty normal and sulfite oxidase-deficient male albino rats were divided into four groups that included untreated controls (group C), a sulfite-supplemented group that received 70 mg sodium metabisulfite per kilogram per day (group S), a sulfite oxidase-deficient group (group D), and a sulfite oxidase-deficient group that was also given 70 mg sodium metabisulfite per kilogram per day (group DS). The iron and zinc levels in the liver and kidney in groups S and DS were not affected by sulfite treatment compared to their respective controls (groups C and D). Sulfite exposure led to an increase of kidney copper content in the S group when compared to untreated controls. The kidney copper levels were significantly increased in the unexposed deficient rats, but it was not different than that of the deficient rats that were given oral sulfite treatment. These results suggest that kidney copper levels might be affected by exogenous or endogenous sulfite. An erratum to this article is available at .     

A concavity property of the viscosity growth curve during alkali gelatinization of rice starch

A qualitative difference between the viscosity–time curves for thermal and strong alkali gelatinization of rice starch was demonstrated using continuous capillary viscometry. During the thermal (60, 70, 75, 80 °C) gelatinization with distilled water, the viscosity growth curves kept a convexity property, in accordance with the past known results. In contrast, the viscosity growth curves for the cold (15, 20 °C) gelatinization with a 0.146 N NaOH solution showed a concavity property in the first half of whole gelatinization process. This result confirmed our previous result having been obtained from batch-type measurement with use of a cone-plate viscometer. On the basis of the first-order reaction hypothesis for gelatinization degree, this novel viscosity growth behavior in cold alkali gelatinization could be described in terms of the mixing rule of viscosity distinct from that had been applied to thermal gelatinization.     

碱性纤维素酶革兰氏阴性菌株筛选及酶学性质研究

用CMC平板筛选方法,从造纸厂碱性淤泥中获得透明圈直径大于30mm的产碱性纤维素酶革兰氏阴性菌H8005。液体摇瓶培养产生碱性CMC酶活力高达4．2IU／mL。酶学性质初步研究显示,H8005产生的CMC酶反应的pH值以8．0左右为适;在碱性条件下具有较高的酶活和一定的稳定性;反应温度以55℃左右为宜;且具有较好的温度稳定性。Mn^2＋与Fe^3＋对酶反应有促进作用,Cu^2＋和Pb^2＋对酶反应有抑制作用。该菌产生的纤维素酶在棉织品的水洗整理及洗涤剂工业中具有非常良好的应用前景。